| 2.8K Temperature Sensor |
| Designed to monitor air temperature in a clean, indoor, environment. Sensing range depends on product. Check back page for Sensaphone product compatibility. Does not come with wire. |
| 2.8K Temperature Sensor.... FGD-0100 |
|
 |
|
 |
| 2.8K Weatherproof Temperature |
| Small, sealed, general purpose temperature probe for indoor or outdoor use. Sensing range depends on product. Check back page for Sensaphone product compatibility. Comes with 12 feet of wire. 2.8K |
| Weatherproof Temperature.... FGD-0101 |
|
 |
|
 |
| 10K Weatherproof Temperature |
| Small, sealed, general purpose temperature probe for indoor or outdoor use. Sensing range depends on product. Check back page for Sensaphone product compatibility. Comes with 12 feet of wire. 10K |
| Weatherproof Temperature.... FGD-0102 |
|
 |
|
 |
| 10K Indoor Temperature |
| Provides precision room temperature sensing in an attractive wall mounted housing. Check back page for Sensaphone product compatibility. Does not come with wire. |
| 10K Indoor Temperature.... FGD-0103 |
|
 |
|
 |
| 10K Outdoor Temperature |
| A weatherproof temperature sensor specifically designed for outdoor use. Check back page for Sensaphone product compatibility. Comes with 8 feet of wire. |
| 10K Outdoor Temperature.... FGD-0104 |
|
 |
|
 |
| 10K Immersion Temperature |
| A waterproof device for measuring the temperature of fluids in a pipe. If features a 304 stainless steel probe and a brass WEL-B thermowell. Check back page for Sensaphone product compatibility. Comes with 8 feet of wire. |
| 10K Immersion Temperature.... FGD-0105 |
|
 |
|
 |
| Temp° Alert |
| Wall mount, mechanical temperature sensor to detect if air temperature is too high or too low. Alarm limits are adjustable from -30° to 130° F. Works with all sensaphone products. Does not come with wire. |
| Temp ° Alert.... FGD-0022 |
|
 |
|
 |
| J Type Thermocouple/4-20mA Converter |
| This will allow you to use a standard J-type thermocouple on any Sensaphone that accepts a 4-20mA input signal. Thermocouple not included. Check back page for Sensaphone product compatibility. |
| J Type Thermocouple Converter.... FGD-0220 |
|
 |
|
 |
| Humidistat |
| Wall mount humidity sensor to detect if humidity if too high or too low. Alarm limits are adjustable from 10% to 60% RH. Works with all Sensaphone products. Does not come with wire. |
| Humidistat.... FGD-0027 |
|
 |
|
 |
| Humidity 4-20mA Transmitter |
| A space mount, low profile humidity transducer. Transmits actually humidity levels to Sensaphone for programmable high and low alarm limits. Check back page for Sensaphone product compatibility. Does not come with wire. |
| Humidity 4-20mA Transmitter.... FGD-0052 |
|
 |
|
 |
| 24VDC Power Supply for FGD-0052 |
| Exclusively for use with the FGD-0052 Humidity Transmitter. Only required if the Sensaphone model does not provide loop power for 4-20mA circuit |
| 24V Power Supply for FGD-0052.... FGD-0053 |
|
 |
|
 |
| PowerOut Alert MODEL PS-110 |
| A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Works with all Sensaphone products. Comes with 15 feet of wire. |
| Power-Out Alert MODEL PS-110.... FGD-0054 |
|
 |
|
 |
| Spot Water Detection |
| Sensor Detects the presence of water on the floor. Works with all Sensaphone products. Comes with 25 feet of wire. |
| Spot Water Detection Sensor.... FGD-0013 |
|
 |
|
 |
| Zone Water Detector |
| For use in detecting the presence of water on a floor or in a false ceiling. Comes with 10’ of WaterRope cable to cover a larger area than the FGD-0013 water sensor. Up to three WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products. Comes with 25 feet of wire. |
Zone Water Detector.... FGD-0056
Additional 10’ of Water Rope.... FGD-0063 |
|
 |
|
 |
| Magnetic Reed Switch |
| Detects unauthorized entry or intrusion. Can be used with most windows and doors. Works with all Sensaphone products. Does not come with wire. |
| Magnetic Reed Switch.... FGD-0006 |
|
 |
|
 |
| Infra-Red Motion Detector |
| Detects movement in a specific area to monitor for unauthorized entry or intrusion. Works with all Sensaphone products. Does not come with wire. |
| Infa-Red Motion Detector.... FGD-0007 |
|
 |
|
 |
| Smoke Detector 120VAC |
| This photoelectric smoke alarm is powered by a hard wired 120VAC connection and provides an alarm output to trigger a Sensaphone alarm dial out. Works with all Sensaphone products. Does not come with wire. |
| Smoke Detector 120VAC.... FGD-0049 |
|
 |
|
 |
| Smoke Detector 120VAC with Battery backup |
| Same smoke detector as the FGD-0049 with the addition of a battery backup provision so alarms can still be detected during a power failure. Works with all Sensaphone products. Does not come with wire. |
| Smoke Detector w/battery backup.... FGD-0049-B |
|
 |
|
 |
| Tipping Bucket Rain Gauge |
| Measures exact rainfall and reports rain activity to a Sensaphone with a pulse count input type option. Check back page for Sensaphone product compatibility. Comes with 25 feet of wire. |
| Tipping Bucket Rain Gauge.... FGD-0061 |
|
 |
|
 |
| Multi-Point Wireless I/O |
| This matched transmitter and receiver accepts two contacts and one 4-20mA signal and replicates them up to 5 miles away (line of sight). Perfect for connecting distant equipment to your sensaphone. |
| Multi-Point Wireless I/O.... FGD-0205 |
|
 |
|
 |
| External Microphone |
| Provides listen-in and/or high sound alarm capability at a remote location away from your Sensaphone. Check back page for Sensaphone product compatibility. Comes with 25 feet of wire. |
| External Microphone.... FGD-0057 |
|
 |
|
 |
| Telephone Adapter UK |
| Converts the U.S. Style RJ11 telephone plug to the type used in the United Kingdom (BT431A) |
| Telephone Adapter UK.... FGD-0055 |
|
 |
|
 |
| Accessory Wire |
| 50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone. |
| Accessory Wire.... FGD-0010 |
|
 |
|
 |
| ISOTEL Surge Protector |
| Protects Sensaphone products from high voltage surges through AC power and telephone lines. Particularly important in areas of high lightening activity. Works with all Sensaphone products. |
| ISOTEL Surge Protector.... FGD-0023 |
|
 |
|